1. This product is a special large pouring glue for river tables. It will dry slowly in the production of thin layers
2, low temperature will lead to slow curing or even stop curing, low temperature environment application using high transparent low temperature curing adhesive
3, the bonding surface should be dust removal, oil removal, keep the surface clean and dry
4, the construction proportion must be accurate, improper proportion will lead to the colloid does not cure or cure is incomplete
5, AB glue must be kept sealed and pollution-free. After taking the glue, the container cover should be tightened as soon as possible to avoid dampness
6. When stirring, try to stir gently in one direction to avoid too many bubbles. When pouring, it should also be soft and light
7. It is recommended to use a vacuum defoaming machine, which has the best effect. Flame gun or hot air gun can only eliminate the bubbles within 0.5cm of the surface
8, should be in the ventilated environment construction, construction should wear gloves, masks, protective goggles and other protective measures
9. Do not take it. If it gets into eyes or mouth by accident, rinse immediately with plenty of water and seek medical advice
10. Use with caution if allergic to resin
11, the uncured glue can be cleaned with water and acetone. The cured glue can only be removed by mechanical method. If it accidentally contacts the skin, it can be cleaned with warm water and washing powder.
Precautions:
1. Please clearly check the label on the package before matching the glue, and confirm the ratio of the ratio of the A agent to the B agent.
2. The glue tool should be clean and dry, no dust, water and oil.
3. Mix the A and B components according to the proportion and stir evenly to avoid unevenness or lack of hardness.
4. Since the glue starts to react and heat, the more the amount of glue is, the more heat is generated, and the curing time is also shortened. The shorter the time that can be used, so please apply the proper amount of glue according to the time of filling. So as not to cause waste.
5. After the glue is finished, seal the AB agent package to prevent debris or moisture absorption, and ensure the normal use of the next time.
6. A very small number of people exposed to the glue for a long time will produce mild skin allergies, it is recommended to wear protective gloves when used, stick to the skin can be wiped off with Tianna water or alcohol, and cleaned with detergent.
7. Before mass use, please try a small amount, master the use of the product skills, so as not to make mistakes.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
